Sort rock and rubble fast while keeping soil where it belongs. The R72 (72″) and R84 (84″) Skid Steer Rock Bucket Grapples are designed and built in the USA with 3/8″ thick tines and 3″ spacing to sift rocks and debris while leaving dirt behind—perfect for land clearing, site prep, and reclamation. A full-width hardened cutting edge tackles packed material, and the weld-on solid shank with a pinned-on replaceable digging tooth adds bite for stubborn loads.
Dual, independent claws clamp uneven payloads, driven by fully welded 3000 PSI hydraulic cylinders. With a 44″ total inside opening and 20″ closed-claw capacity, you get confident control from grab to dump. Removable side plates adapt the bucket for different conditions, while grease fittings on all pivot points and hose holders that keep lines tight to the lift arms cut downtime. Standard skid steer quick-attach keeps swaps fast across your fleet.
- Built in the USA: Job-site tough construction for high-duty cycles.
- Two Widths: R72 = 72″, R84 = 84″ to match machine and material volume.
- Sifting Performance: 3/8″ thick tines with 3″ spacing—capture rocks, let soil pass.
- Cutting & Digging Power: Full-width hardened cutting edge plus weld-on solid shank with pinned-on replaceable tooth.
- Serious Capacity: 44″ inside opening; 20″ closed-claw capacity for irregular loads.
- Independent Dual Claws: Secure clamp on uneven material with less rollback spill.
- Hydraulic Muscle: Fully welded 3000 PSI cylinders for consistent clamping force.
- Service-Friendly: Grease fittings on all pivot points to extend component life.
- Clean Hose Management: Integrated hose holders keep lines close to lift arms in all positions.
- Fast Hookup: Standard skid steer quick-attach compatible with major brands.
- Adaptable: Removable side plates for varying ground and material conditions.
3" Sifting Spacing
Hardened Cutting Edge
Quick-Attach
Made in the USA
Specs
Fitment & Compatibility
- Coupler: Standard SSQA
- Machine horsepower : 72” – 75 hp | 84” – 75+ hp
Hydraulic Requirements
- Required GPM range and PSI (working & max) max psi 3000
- Cylinder count, bore × stroke, port size, hose ID, coupler size/type cylinders are 2×8, (2” bore, 8” stroke)
Dimensions & Weights
- Overall width (72″/84″)
- Grapple open height (inside), closed height
- Tine count, tine thickness & spacing
- Weight : R72- 1250lbs. | R84-1350lbs.
Materials & Wear Parts
- Cutting edge: material is HB 400
- Tooth system (part #, style), replaceable edge options replaceable teeth are 230 series teeth and pins are 23 series
Build & Protection
- Weld process, cylinder guards, hose routing/guarding
Included
- Hoses, flat-face couplers, side plates (R-series), owners manual
Warranty & Support
- 2 year unlimited hour warranty on workmanship, excludes wear items and 6 months on hydraulics
- Service parts list with part numbers (teeth, edges, cylinders, seals) List above info on teeth and pins leave the rest out
Logistics
- Liftgate option, residential delivery surcharge
FAQs
If your machine uses SSQA, it will fit. Check hydraulic GPM/PSI requirements above.
Recommended – GPM at up to 3000 PSI for full clamping performance.
Yes. See parts list for tooth part # and cutting edge options.
G-series: best for logs/brush/debris handling. R-series: adds 3" sifting and hardened cutting edge for rock/soil separation.
In-stock ships – business days; BTO __ weeks. LTL freight, liftgate available.
__ years / __ hours against defects; wear parts excluded.
Reviews
There are no reviews yet.